Extract engine oil within a few minutes in pneumatic mode with EWK manual/pneumatic oil extractor pump. Fast suction speed, perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid.
Not enough stock.
Your item was not added to your cart.
Not enough stock.
Please adjust your quantity.
Limit {{ product.max_order_quantity }} per order.
Only {{ quantityOfStock }} item(s) left.
▲ The main tube with flow control valve that helps you control the flow capacity by simply switching the valve.
▲ The vacuum oil changer comes with 62 inch long main tube and 2 sizes of 59 inch long dipstick tubes. Slide it to reach the very bottom of the reservoir and suck up every drop of oil easily.
▲ The heavy duty handle can stand up to plenty of force as well as create strong suction under fast pumping.
▲ Quick connector design that helps to easily connect the main tube onto the pump, and disconnect it by one simple press.
▲ DO NOT use the unit with Gasoline and fluids with high volatility, high corrosion, high temperature.
▲ DO NOT store suck out liquids in the container for a long time.
▲ Working pressure between 20-25 psi.
▲ Working temperature between 35°F-140° F. To make the extraction job smooth and easy, evacuate the oil while it is warm.
▲ Connect the dipstick tube to the main tube that plug in the pump, and insert the connected tube into the dipstick pipe until it reaches the bottom of the oil pan.
▲ Before extraction, make sure the tubes are connected tightly.
▲ Switch the valve to extract mode, and connect the air compressor. You will see the fluid begins to fill the tank.
▲ Remove the hose from the reservoir. Switch the valve to dispense mode, and pump the handle to exhaust the used fluid to another container and dispose it to the recycling center.