Out of stock
JOHN C CROCKER
– May 13, 2019
Great quality and service
Perfect fit and very nice quality. The crank alignment tool was lost in shipment, but this was replaced quickly.
John & Celeste
– May 8, 2019
A must have for pump and timing belt change
– September 17, 2018
Worked perfect on VW Passat 2.7
– May 7, 2018
Great for timing belt job
– April 29, 2018
Good fit and function.
– April 20, 2018
Good value, quick shipping, must have for timing belt, cam seals, other common upper engine leaks on these engines.
Kit is substantial, solid, and very well valued. Item was shipped well and arrived within a few days. The pins on cam lock bar were slightly non-perpendicular, perhaps by design. It took a few times to figure out how to get it onto the cam flanges (engage on one side in particular first, then the other), but once in place it was very sturdy and secure. The crank locking pin has a nice oxide coating that withstood a few thredings in/out typical of a timing belt job. But it looked slightly bent after torquing the damper bolt. I believe the crank locking pin is still perfectly functional, and I did not notice any drift on the damper timing mark. To be fair, many aftermarket crank locking pins tend to exibit this deformation. I would recommend to confirm timing mark drift regardless of the tool used.
– April 9, 2018
You need this for engine timing
This part has a nice chrome looking finish. As intended, the tool fits the overhead pulleys snug and tight so you can lock in your timing alignment. The engine holding tool works great as well. It is solid metal and fits the service point properly. I needed these tools so I could replace these parts: water pump, thermostat, timing belt, idler pulley, timing belt hydraulic tensioner. I highly recommend this item to anything looking to do these services themselves.
– March 21, 2018
cheap and good!
good tool for the price. does the job. amazing.
– February 15, 2018
Audi camshaft tool
Very helpful works as advertised.
– January 13, 2018
This is good investment for every mechanic, thank you
– December 28, 2017
As described, good quality
– November 7, 2017
aligned my car to tdc great value and quality
Couldn’t have done the job without..aligned my car to tdc great value and quality.
– October 9, 2017
Can’t go wrong with this!
Fantastic deal, quality steel, perfect fit!
– September 30, 2017
Worked perfectly and made the timing belt replacement job much less stressful. A must have for this repair.
– September 29, 2017
Great tool great price. Cant alighn the cams without this tool.
– September 25, 2017
Great tool to have
Emerick H. Bultman
– August 31, 2017
Must have for VW/Audi V6.
Wow! Can’t imagine not having this to install a timing belt on a VW/Audi 2.8. Perfect fit. Good price for such a substantial tool.
– August 26, 2017
It worked as advertised and saved me some dough doing the job myself.
– August 15, 2017
It’s a good low cost option for doing the timing belt / water pump / thermostat service yourself. The only issue I had is that it doesn’t have the threaded hole to hold it in place so it will occasionally fall off if you’re trying to work behind it. It’s not a big problem but other ones have the threaded securing hole and this one does not.
– July 22, 2017
Works great and not to expensive
Works great and not to expensive. Something one may need once and a while. Gota have to do the job
– June 25, 2017
This tool saves a lot of time and aggravation. Worked perfectly.
– April 6, 2017
– March 30, 2017
Just what we needed for the job!
– March 24, 2017
Good snag for the money
Tool worked well. Machining is a little off. Fit was a little forced. Not sure if the thread pitch is a little off or not cut correctly but had to apply a lot of pressure to get the threads to grab of the crankshaft pin. Other than that it works as directed. Must have tool for perfectionists that want a little more confidence in thier work.
– January 30, 2017
This camshaft tool worked great! I’ve been working on a 2003 VW Passat
This camshaft tool worked great! I’ve been working on a 2003 VW Passat, with the 2.8 motor. The alignment tool is essentially a very heavy piece of flat bar stock (steel), with dowel pins installed at the correct locations to align the camshafts.I don’t understand why anyone would buy a more expensive version of the same tool. This is the one to get.
– January 4, 2017
It worked as it was supposed to
– January 2, 2017
Was very happy with it
Product was very well built have seen the same product for 4x the price. Was very happy with it.
– December 4, 2016
Arrived in good order and fits my engine.
– November 18, 2016
Great product, great company!
While it didn’t quite fit, it was a high quality tool for sure, would order again if ever needed!Great customer service from the seller!
– November 7, 2016
– October 21, 2016
A must have for timing belt jobs in a 2.0.
– October 16, 2016
Audi Cam tool
Worked exactly as I had hoped
– October 13, 2016
Excellent tool. Fast shipping.
anthony l perrino
– September 27, 2016
everything is as expected
– September 18, 2016
Great to do business with
Excellent Very happy with my experienceAwesome to do business with
– September 16, 2016
Awesome tool for the price
Well built good quality definitely would recommend.
– August 12, 2016
Worked well, as it should have.
– August 4, 2016
have not used yet but great quality.
– July 2, 2016
Great Tool A+++
– July 1, 2016
Totally helpful(practically necessary! ) in aligning the cams properly …
Totally helpful(practically necessary!) in aligning the cams properly, 250 miles since timing belt change(Audi A4, 30v 2.8), and no problems, thanks to this tool.
– June 18, 2016
– June 11, 2016
cheap good product
– June 8, 2016
Worked out great!
Mark E Phelps
– June 3, 2016
This tool worked perfect and was very affordable!
– May 22, 2016
great tool great value works perfect
Kevin L Walls
– May 16, 2016
great tool great price fast delivery
Jose Luis Rodriguez
– May 15, 2016
Tool worked right on, meet my expectations.
– May 1, 2016
Worked as expected.
Delton L. Moore
– April 27, 2016
Cam and crankshaft alingment tools
VW/Audi Crankshaft and Cam Shaft tools ( 2 items) were as advertised and exact tool aas required by VW to assist in the replacement of timing belt,, belt rollers, tension unit,and water pump. Good price for tools.
RONALD A ARBOGAST
– April 24, 2016
VW Audi Camshaft Alignment Timing Tool Set A4 A6 S4 V6 EWK TOOL
GREAT QUALITY AND WORKED LIKE A CHAMP, GREAT BUY, HIGHLY RECOMENDED! DON’T PAY A TOOL TRUCK $200.00 WHEN THIS IS A BETTER QUALITY TOOL THEN THEY SELL!!!!!!!!!!!!!!
You must be logged in to post a review.