【 EB0015 】EWK 14 Flutes 6 Slots 64mm Cartridge & Cap Type Oil Filter Wrench for Toyota/ Lexus/ Scion/ Prius, Corolla, CT200h

Rated 4.96 out of 5 based on 73 customer ratings
(73 customer reviews)

$11.99

  • 【 Wide Applications 】 This 64mm 14 flute Toyota oil filter wrench specially fits Toyota Corolla, Prius, Matrix; Lexus CT200h; Scion XD, IQ, and IM. It also fits vehicles equipped with 1.8L 4-cylinder engines that use the newer cartridge style oil filter system. *This tool does not work on vehicles with traditional disposable spin-on style or canister type oil filters.
  • 【 Tough and Sturdy 】 EWK cup style Toyota oil filter tool is forged from heavy duty material, which will provide great power to rotate the extremely tight oil filter cap without cracking itself.
  • 【 Perfect Fit 】 There are 6 slots on the bottom edge, which will match perfectly with the tabs on the Toyota cartridge style oil filter cover and prevent slippage when you unscrew the oil filter housing with tremendous strength by the 3/8 inch drive or adjustable spanner.
  • 【 Damage Free 】 The 14 flutes oil filter socket will not cause damage to your plastic housing cap because we increased the contact area of the wrench on the housing to eliminate this problem. Not only saves effort, but also avoids damaging the filter cover due to excessive force.
  • 【 Excellent Support 】 Service and Quality guaranteed! EWK provides you premium quality tools with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance.

In stock

- +
Compare

EWK Oil Filter Wrench for Toyota, Lexus, and Scion 1.8 Liter Engines with 64mm Cartridge Style Oil Filter System
Designed perfect for Prius, Prius V, Corolla, Matrix, CT200h, iM, iQ, xD and More with cartridge & Eco style oil filters.

Unique Design

  • There are 6 notches on bottom edge which fits perfectly on the oil filter cover and prevent slippage while unscrewing the oil filter housing.
  • Remove the overtightened oil filter cap much faster, safer, and easier.

Built to Last

  • Made of anti-corrosion aluminum ensures you a life time use oil filter cap remover.

Wide Applications

  • 2009-2017 Toyota Corolla
  • 2009-2013 Toyota Matrix
  • 2010-2017 Toyota Prius
  • 2012-2017 Toyota Prius V
  • 2011-2017 Lexus CT200h
  • 2008-2014 Scion xD
  • 2012-2015 Scion iQ
  • 2016 Scion iM
  • Does not fit Prius C

Note

  • Torque the wrench by using either a 27mm socket or a 3/8 inch ratchet.
  • Do not use with electric impact wrench.
  • Does not work on vehicles with traditional canister filters that you unscrew and throw away.
Weight 0.4 lbs
Dimensions 8 × 5.5 × 2.5 in

73 reviews for 【 EB0015 】EWK 14 Flutes 6 Slots 64mm Cartridge & Cap Type Oil Filter Wrench for Toyota/ Lexus/ Scion/ Prius, Corolla, CT200h

  1. Rated 5 out of 5

    Fish

    Perfect fit for 2010 Toyota Matrix
    Worked great to remove the oil filter cap on my 2010 Toyota Matrix (same cap as the 2010 Corolla). Feels well made and the price was good!

  2. Rated 5 out of 5

    Aslan

    Good one

  3. Rated 5 out of 5

    Anna-Kay

    Great quality. Was actually for my dad. He thinks they are great. Recommended.

  4. Rated 5 out of 5

    C Lev

    Perfect fit, havent broke it yet
    Perfect fit for my girlfriends Prius V. I have a regular Prius that uses a different filter wrench. This one was solid and if you read the directions, you shouldnt have problems with it.

  5. Rated 5 out of 5

    jessica mvl

    First oil change on a used 2014 Prius and I couldn’t remove the dealership-over-tightened filter cover with my trusty old universal rubber wrench. With this tool with my socket wrench, a hammer and a towel (as padding) I got it off in about five minutes.

  6. Rated 5 out of 5

    Camron N.

    changed the oil with no problem
    changed the oil with no problem

  7. Rated 5 out of 5

    Fish

    Worked great to remove the oil filter cap on my 2010 Toyota Matrix (same cap as the 2010 Corolla). Feels well made and the price was good!

  8. Rated 5 out of 5

    joel hoffman

    Works
    Works

  9. Rated 5 out of 5

    kennth walters

    fit toyota
    needed for Toyota oil fitter cap. like the finger grab on the ears of the cap and hole better . you can use a 3/8 drive or a socket to turn it.

  10. Rated 5 out of 5

    Carrie D.

    Great product
    Needed this so that my husband could change my oil in my car at home.Works great

  11. Rated 5 out of 5

    Dan

    high quality looking wrench
    There are alot of wrenches to chose from on Amazon. I chose this wrench for the price and because the seller took the time the let people know how to use it and I quote The Oil Filter Wrench Is Suggested To Use With A 3/8 Inch Drive For Tightening And A 27mm Socket For Loosening. Most of the wrenches are made of cast aluminum and will break if you use the 3/8 drive to take the oil filter housing off when it is too tight. The wrench is very good quality and the manufacturer even put a sticker on the wrench saying not to use the 3/8 drive to loosen the filter housing. I should work great , Toyota just changed my oil and I won’t need it until next year. I know I am making it sound like I am not a real buyer but I truly am and I couldn’t be happier with the wrench.

  12. Rated 5 out of 5

    Camron N.

    changed the oil with no problem

  13. Rated 5 out of 5

    joel hoffman

    Works

  14. Rated 5 out of 5

    kennth walters

    needed for Toyota oil fitter cap. like the finger grab on the ears of the cap and hole better . you can use a 3/8 drive or a socket to turn it.

  15. Rated 5 out of 5

    Carrie D.

    Needed this so that my husband could change my oil in my car at home.Works great

  16. Rated 5 out of 5

    Dan

    There are alot of wrenches to chose from on Amazon. I chose this wrench for the price and because the seller took the time the let people know how to use it and I quote “The Oil Filter Wrench Is Suggested To Use With A 3/8 Inch Drive For Tightening And A 27mm Socket For Loosening.” Most of the wrenches are made of cast aluminum and will break if you use the 3/8″ drive to take the oil filter housing off when it is too tight. The wrench is very good quality and the manufacturer even put a sticker on the wrench saying not to use the 3/8″ drive to loosen the filter housing. I should work great , Toyota just changed my oil and I won’t need it until next year. I know I am making it sound like I am not a real buyer but I truly am and I couldn’t be happier with the wrench.

  17. Rated 4 out of 5

    nguyen,tien

    Work good but just broken 1 tooth.

  18. Rated 5 out of 5

    Denis E. Gonzalez

    Five Stars
    Good

  19. Rated 5 out of 5

    Denis E. Gonzalez

    Good

  20. Rated 5 out of 5

    Lisa

    Money saver
    Worked as described and good value.

  21. Rated 5 out of 5

    Lisa

    Worked as described and good value.

  22. Rated 5 out of 5

    S. Singh

    Good quality sturdy product
    The perfect thing that I needed. Commercial quality for replacing oil filters on my Toyota

  23. Rated 5 out of 5

    Kwang C

    Necessary tool for DYI Prius owners.
    Works well with late mode Prius, 2012 and up. It also fits a variety of other Toyota oil filters.

  24. Rated 5 out of 5

    KloMo

    strong
    i used an impact wrench on this because the filter cup was put on so tight. and it is still solid and holding up great everyday at a dealership.

  25. Rated 5 out of 5

    Gamer_Dad

    Five Stars
    Works great

  26. Rated 5 out of 5

    Amazon Customer

    Works like a charm
    Love this tool because it works like a charm. I first tried a metal one from the local auto parts store and it didn’t work. I then bought this tool ($13.99), a 1/2 drive 27MM socket ($7.99), a 5 extension bar ($7.99) and a long breaker bar ($21.99) for leverage. All these part we’re a bit expensive but so that was my only complaint. All these parts cost me $52.00. Would be so much easier if Toyota used a standard oil filter.

  27. Rated 5 out of 5

    squidly

    Awesome, fits perfectly in a tight spot where nothing …
    Awesome, fits perfectly in a tight spot where nothing else I have would do the job. Turned a difficult job into a breeze.

  28. Rated 5 out of 5

    Doug Wilde

    Five Stars
    Great products

  29. Rated 5 out of 5

    Dennis J. Hill

    Very sturdy tool, good fit and finish
    It works flawlessly on my 2013 Prius. Very sturdy tool, good fit and finish.

  30. Rated 5 out of 5

    Amazon Customer

    Great Tool – Just Us It Right GET THE CORRECT SOCKET
    Okay, I have used this tool on a 2010 Camry LE, 2011 Corolla S, and 2012 LE Camry, can you tell I am a Toyota guy? it worked great on all 3. As I have seen stated else where, the car dealerships seem to take joy in making shade tree mechanics life miserable and will tighten the canister to the point you can barely get it off. The typical torque requirement to install the canister is like 20 to 30 foot pounds not 90. The torque required to install the canister is molded into the top of the oil canister. As others have said, if you use a 3/8 drive socket on the tool you will likely break the tool, get the correct metric socket. I believe it is a 24 or 27 mm. Some of these tools I have seen no longer have the 3/8 socket built in, it is very tempting, but don’t use it. Take the time and make sure you lineup the tool correctly with the notches in the tool with the tabs on the canister and fully engage the tool with the canister. You will probably need to gently tap the tool to get it off the canister after removing or installing the canister.

  31. Rated 4 out of 5

    wademan

    This fits well and was reasonably priced.

  32. Rated 5 out of 5

    Dan

    Five Stars
    This item arrived on time and was as advertised.

  33. Rated 5 out of 5

    David H. Rang

    Five Stars
    Good quality and appears to be the ticket for my next oil change.

  34. Rated 5 out of 5

    Mike Zulic

    Is a great product, by mistake in ordered this and when …
    Is a great product, by mistake in ordered this and when it came in saw it was for 4 cylinder Toyota up to 2000cc. My camry is a 2.5 liter 4 cylinder. It worked but didn’t reach the planned fingers for more strength. But again was my mistake. Next size up would probably be deeper.

  35. Rated 5 out of 5

    GENARO D.

    This tool fits perfect on 2013 Toyota Camry SE
    This tool fits perfect on 2013 Toyota Camry SE, 4cyl, 2.5L 4engine…. I used mine with 27mm socket from Sears as recommended by other reviewer. Highly recommended to other.

  36. Rated 5 out of 5

    julio martinez

    Five Stars
    Very good

  37. Rated 5 out of 5

    dung k pham

    Five Stars
    good

  38. Rated 5 out of 5

    Be Vegan Make Peace

    Five Stars
    Excellent quality and fast shipping. Highly recommended

  39. Rated 5 out of 5

    Bilal

    Five Stars
    Looks good

  40. Rated 5 out of 5

    Mr. Michael J. Cahan

    Five Stars
    Fits filter housing perfectly

  41. Rated 5 out of 5

    Omar Ramirez

    Five Stars
    great & helpful tool if you own a toyota and you like to do mechanics at home.

  42. Rated 5 out of 5

    Alfredo perez

    Five Stars
    Great tool. Fits perfectly.

  43. Rated 5 out of 5

    Terry B

    Five Stars
    nice must have for toyota corrola

  44. Rated 5 out of 5

    S. Singh

    The perfect thing that I needed. Commercial quality for replacing oil filters on my Toyota

  45. Rated 5 out of 5

    Kwang C

    Works well with late mode Prius, 2012 and up. It also fits a variety of other Toyota oil filters.

  46. Rated 5 out of 5

    KloMo

    i used an impact wrench on this because the filter cup was put on so tight. and it is still solid and holding up great everyday at a dealership.

  47. Rated 5 out of 5

    Gamer_Dad

    Works great

  48. Rated 5 out of 5

    Amazon Customer

    Love this tool because it works like a charm. I first tried a metal one from the local auto parts store and it didn’t work. I then bought this tool $13.99, a 1/2″ drive 27MM socket $7.99, a 5″ extension bar $7.99 and a long breaker bar $21.99 for leverage. All these part we’re a bit expensive but so that was my only complaint. All these parts cost me $52.00. Would be so much easier if Toyota used a standard oil filter.

  49. Rated 5 out of 5

    squidly

    Awesome, fits perfectly in a tight spot where nothing else I have would do the job. Turned a difficult job into a breeze.

  50. Rated 5 out of 5

    Doug Wilde

    Great products

  51. Rated 5 out of 5

    Dennis J. Hill

    It works flawlessly on my 2013 Prius. Very sturdy tool, good fit and finish.

  52. Rated 5 out of 5

    Amazon Customer

    Okay, I have used this tool on a 2010 Camry LE, 2011 Corolla S, and 2012 LE Camry, can you tell I am a Toyota guy? it worked great on all 3. As I have seen stated else where, the car dealerships seem to take joy in making shade tree mechanics life miserable and will tighten the canister to the point you can barely get it off. The typical torque requirement to install the canister is like 20 to 30 foot pounds not 90. The torque required to install the canister is molded into the top of the oil canister. As others have said, if you use a 3/8″ drive socket on the tool you will likely break the tool, get the correct metric socket. I believe it is a 24 or 27 mm. Some of these tools I have seen no longer have the 3/8″ socket built in, it is very tempting, but don’t use it. Take the time and make sure you lineup the tool correctly with the notches in the tool with the tabs on the canister and fully engage the tool with the canister. You will probably need to gently tap the tool to get it off the canister after removing or installing the canister.

  53. Rated 5 out of 5

    Dan

    This item arrived on time and was as advertised.

  54. Rated 4 out of 5

    mike crockett

    Good tool but not top quality. Metal should be a little thicker. It did the job.

  55. Rated 5 out of 5

    David H. Rang

    Good quality and appears to be the ticket for my next oil change.

  56. Rated 5 out of 5

    Mike Zulic

    Is a great product, by mistake in ordered this and when it came in saw it was for 4 cylinder Toyota up to 2000cc. My camry is a 2.5 liter 4 cylinder. It worked but didn’t reach the planned fingers for more strength. But again was my mistake. Next size up would probably be deeper.

  57. Rated 5 out of 5

    GENARO D.

    This tool fits perfect on 2013 Toyota Camry SE, 4cyl, 2.5L 4engine…. I used mine with 27mm socket from Sears as recommended by other reviewer. Highly recommended to other.

  58. Rated 5 out of 5

    julio martinez

    Very good

  59. Rated 5 out of 5

    dung k pham

    good

  60. Rated 5 out of 5

    Be Vegan Make Peace

    Excellent quality and fast shipping. Highly recommended

  61. Rated 5 out of 5

    Bilal

    Looks good

  62. Rated 5 out of 5

    Mr. Michael J. Cahan

    Fits filter housing perfectly

  63. Rated 5 out of 5

    Omar Ramirez

    great & helpful tool if you own a toyota and you like to do mechanics at home.

  64. Rated 5 out of 5

    Alfredo perez

    Great tool. Fits perfectly.

  65. Rated 5 out of 5

    Terry B

    nice must have for toyota corrola

  66. Rated 5 out of 5

    darwin

    1/20/15
    Works as expected.
    The dealers and others frequently over torque the plastic cover. That may make using this the first time a particular challenge with some anxiety over cracking the plastic part.
    As engine designers shift away from canisters to filter cartridges, they should redesign the location of the oil filter from crawling under the bottom of the vehicle to be accessible from the top.

  67. Rated 5 out of 5

    jt65

    Fit perfect nice tool to change oil filter quickly thanks

  68. Rated 5 out of 5

    Lisa X.

    Fit perfectly! As expected! Got my oil changed and now will be a breeze to change oil from now on!

  69. Rated 5 out of 5

    vad baev

    Sturdy and perfectly fits the Toyota Camry (believe many other late years models). Do not try to change oil filter without the tool! You risk damaging the housing and the repair will be costly – including towing to the dealership.

  70. Rated 5 out of 5

    Robert H. Hanson

    Works great!

  71. Rated 5 out of 5

    Oscar Rosado

    Great item works fine.

  72. Rated 5 out of 5

    rolando mederos

    all good

  73. Rated 5 out of 5

    Roosevelt Jackson

    It fits my 2014 Highlander & seem to be well constructed.

Add a review