15 liters of oil can be extracted at one time.
Heat Resistant Tank
Made from polypropylene which can withstand 200°F.
Pattern designed handle provides more stability for using.
More than enough 5 minutes, connect with a compressor make a quick extraction.
Lock the hose and spout securely provide a safe operation.
Release the negative pressure when extracting, press the decomression valve to make a fluent extraction.
The spout was designed as eagle mouth to make it fluent and prevent spilling out.
Special design stop button to avoid oil spilling out when remove tubes.
Keep Your Engine Warm
Start the engine, make sure the oil is warm, and make it smoother when pumping.
Remove Oil Dipstick
Insert the extractor tube into the dipstick pipe until it reaches the bottom of the oil pan.
Choose the fuction you need.
Finish the Work
After extraction, clean the hose with rub, remove the hose and connect the pouring spout.
• A. Diameter : 5.3 × 6.7 mm / Length : 39.3 Inches
• B. Diameter : 4.0 × 6.0 mm / Length : 39.3 Inches + Wire
• C. Diameter : 7.8 × 9.8 mm / Length : 39.3 Inches
• D. ( Brake Bleeding Tube ) Diameter : 4.0 × 8.0 mm / Length : 59 Inches
• E. Extractor Pump
The Nylon Hoses Are Consumables In The Set And Should Be Changed When They Are Worn Out Get New Ones By Searching "EWK Extractor Hose”.